How to Root Galaxy S20 Series By Using Magisk

This guide has been meant keeping in mind those Samsung Phones that run on Android 11. We will give a quick recap with the description that there are two methods to install Magisk Manager and gain root access. Either by flashing the installer ZIP via custom recovery, or you could patch the phone’s stock boot image and then flash the resultant patched boot back to your phone.

galaxy

let us start with the rooting process, but before that, what requirements do you require for the process will see that:

Requirements Before Rooting The Device

  1. before taking any action in the rooting process, the first step you need to take is to take the Backup of all the essential data stored on your device.
  2. Ensure that you have installed the correct Samsung USB drivers on your personal computer.
  3. The battery of your Samsung phone must be sufficiently charged to a certain percentage level so that it does not get Turn off during the rooting process.

Steps to Root Samsung Galaxy S20 Series

Step 1: Turn On the OEM Unlocking

  • Go to the settings tab, select the Developer’s Option on your Samsung Galaxy S20, and then turn on the “OEM Unlocking” and select the Enable button when prompted on the screen.
  • It is the first step to enable the OEM Unlock on the Samsung devices. This option must be switched on before you attempt to unlock the bootloader.
rooting

Step 2: Unlock Bootloader of Samsung Galaxy S20 series

  • You will now need to unlock the bootloader after getting the OEM unlock enabled. Samsung devices do not require using any fastboot commands or involve retrieving the unlock keys.
  • To unlock the Samsung Galaxy bootloader, switch off your device first, and then connect it to the computer using the USB cable while pressing the Volume Down button and the Bixby Keys altogether. Long press the Volume Up key to enter into the Device Unlock Mode, so hit the Volume Up Key to confirm the Unlock bootloader.

Step 3: Verify Software Build Number

  • Before downloading the stock firmware package, it is essential to verify the build number of the software installed on the device. To execute this, go to the settings button and select “About Phone,” and then click on the software information and then check the right information under the Build Number section.

Step 4: Download Stock Firmware Package

  • The rooting process includes the patching of the AP firmware file using Magisk Manager. So start with downloading the Stock Firmware Package.
root galaxy

Step 5: Extract AP Firmware File and Transfer to Your Phone

  • After downloading the firmware package, extract the file’s contents and then transfer those files into your computer. Go to the location where the firmware was downloaded on the computer, make a right-click on it, select the “Extract All” button and then click on the “Extract” tab to extract the firmware’s data package to a folder.
  • Then connect your Samsung mobile phone to the PC via USB cable and then turn on the file transfer mode on it. Then copy the extracted file to the internal storage of your phone. You can copy this file to the root directory for easier access.

Step 6: Patch AP firmware Using Magisk

  • Now in the next step of the process, you have to Patch the AP Firmware with the Magisk through the Magisk Manager companion app. You need to download the latest Magisk Manager, install the APK file on your device, and then launch it.

Step 7: Boot Galaxy S20 Series into the Download/Odin Mode

  • After flashing the patched firmware, boot your Samsung Galaxy S20 series into the Download or the Odin Mode. to execute this, turn off your phone and then connect it to the computer by USB
  • When you hold the Volume Up and Volume Down Keys simultaneously, you will see the bootloader screen. Just hit the Volume Up key once to enter into the Odin Mode.

Step 8: Download and then Launch Odin Tool on the PC

  • Download the latest and updated version of Odin Flash Tool on your Personal Computer and then extract the data of that downloaded zip file on your PC.
  • Launch the Odin Tool by double-clicking on the executable file and click on the OK button on a promoted message.

Step 9: Flash the Patched File and Root the Galaxy S20 Series By Magisk

  • It’s time to flash the patched Firmware file and root the Samsung Galaxy S20 Series using the Magisk Manager.
  • Load all the firmware files first in the Odin Tool, and once all files are loaded in their prescribed slots, click on the Options tab and uncheck the Auto Reboot button. And finally, click on the Flashing process.
  • After that, when the process is finished, the phone will get automatically gets a reboot, and the phone has been successfully rooted by using Magisk Manager.

Samsung odin linksOdin samsung softwareOdin software for PC
Odin multi downloaderOne plus sans fontRealme bootloader
Fix samsung odin modeUnbrick samsung galaxyExit from odin mode
Update samsung phoneOdin software guideMagisk manager
Download soloop appSamsung boot loaderHot 8 guide
Samsung twrp recoveryRemove personal informationSamsung backup

Related Post

4 Replies to “How to Root Galaxy S20 Series By Using Magisk”

  1. Hey this is somewhat of off topic but I was wondering if blogs use WYSIWYG editors or
    if you have to manually code with HTML. I’m starting a blog soon but have
    no coding expertise so I wanted to get guidance from someone with experience.
    Any help would be enormously appreciated!

  2. Hi, i think that i saw you visited my web site thus i came to “return the favor”.I’m attempting to find things to enhance my website!I suppose its ok to use some
    of your ideas!!

Leave a Reply to deniel Cancel reply

Your email address will not be published. Required fields are marked *